Where is the VIN number in Alfa Romeo Giulietta (116) [2010-2010]?

This guide covers where to find the VIN (chassis number) on the Alfa Romeo Giulietta (116) [2010-2010], including the quickest check points and the hidden stamped chassis VIN used for verification.

Chassis Number Locations

Engine Bay – Manufacturer Plate (Front Slam Panel / Radiator Support)

• Where to look: Open the hood and locate the metal plate riveted to the top of the radiator support (slam panel), slightly toward the passenger side on LHD cars, near the headlight area. It’s a silver plate with black text showing weights and the full VIN.
• Access: Low difficulty. No tools needed—just open the hood. If it’s dirty or lightly corroded, scrub it clean with a rag.
• Note: Orientation is easiest on LHD cars; you’re looking on the vehicle’s front slam panel area, slightly offset to the vehicle’s right side.
• Tip: If grime or corrosion makes characters hard to read, wipe the plate and then use the High Contrast AI VIN scanner to pull the VIN cleanly without guessing faded letters.

Windshield VIN (Lower Dashboard Corner)

• Where to look: From outside the car, look through the lower corner of the front windshield near the A-pillar/dashboard corner (commonly on the driver’s side on LHD).
• Access: Medium difficulty. The VIN is visible without opening anything, but glare/reflections can hide characters.
• Note: Left/right placement can vary by market/build, so if you don’t see it on one corner, check the opposite lower corner.
• Tip: When glare is bad, tilt your phone slightly and scan it instantly with your camera so you don’t misread characters through reflections.

Floor VIN – Stamped Chassis Number (Front Footwell, Under Carpet Flap)

• Where to look: Check the front footwell floor (commonly on the passenger side for LHD vehicles) directly in front of the seat. Find the rectangular plastic flap/cover integrated into the carpet, then lift it to reveal the VIN stamped into the metal chassis.
• Access: Medium–High difficulty. You’ll be kneeling outside the car, and it’s typically dark down there. The stamping can be low-contrast (body-colored metal).
• Note: “Right side” means the vehicle’s right side (direction of travel reference). If you don’t find it on the passenger side in an LHD car, check the other front footwell as well.
• Tip: Because it’s dark and the stamping can blend into the paint, turn on your phone light and use Flashlight + OCR scanning to capture the stamped VIN without squinting or writing it down in an awkward position.

OBD Port Area (Diagnostic Connection Point)

• Where to look: On LHD cars, the OBD port is located behind the driver-side dash trim, near the steering column / fuse box area.
• Access: High difficulty. You may need to remove a trim panel to access it for a diagnostic tool.
• Note: This isn’t a “printed VIN label” location, but it’s relevant if you’re verifying the car with a scan tool.
• Tip: If you’re working under the dash and don’t want to keep re-checking paperwork, scan the VIN from an easier spot first (windshield or engine bay plate) so you have the exact VIN on your phone while you work.

Video Guide

Video Tutorial: Where is the VIN number of my Alfa Romeo Giulietta (2010–2020)

▶ Watch Alfa Romeo Giulietta VIN Location Guide

• Shows the engine bay manufacturer plate, the windshield VIN, and how to lift the carpet flap in the front footwell to reveal the stamped chassis VIN.

Common Problems & Troubleshooting

• Engine bay plate unreadable: Dirt/oxidation on the slam panel plate can hide characters—clean it first, then re-check under better light.
• Stamped floor VIN hard to see: The footwell is dark and the stamping can be body-colored—use a flashlight and change your viewing angle to catch the stamp.
• Don’t rely on one sticker: Labels/plates can be replaced; for a proper check, match the windshield VIN, engine bay plate, and the stamped chassis VIN before buying.

---