Where is the VIN number in Chevrolet Cruze I [2010-2012]?

This guide covers the first-generation Chevrolet Cruze (roughly 2010–2012). You’ll usually find multiple VIN references around the car—some are easy to see, others are hidden under trim or carpet.

Chassis Number Locations

Dashboard VIN plate (through windshield)

• Where to look: At the lower corner of the windshield on the left side of the car (driver’s side on LHD cars). The VIN sits on a small plate at the edge of the dashboard, readable from outside the vehicle.
• Access: Easy to reach, but windshield reflections/glare and dust buildup in the corner can obscure the characters. Wipe the glass and the dash edge if needed.
• Note: This is the fastest “walk-up” VIN check and is typically the best scanning target.
• Tip: If glare washes out the digits, use ScanVin.app and slightly tilt the phone/camera angle to capture the VIN instantly without transcription mistakes.

Door jamb / B-pillar VIN sticker (label)

• Where to look: Open the front door and inspect the lower section of the B-pillar/door jamb on the left side of the car. You’re looking for a black label with white text showing the VIN and weight/manufacturing data.
• Access: Usually very easy, but the label can fade, peel, or get scratched over time.
• Note: In the footage, the sticker appears to stay on the left B-pillar even when steering position changes (RHD vs LHD can change which door is “driver”).
• Tip: This label is high-contrast and scans well—use ScanVin.app to avoid misreading similar characters (8/B, 5/S, 1/I).

Service Parts ID sticker (inside glove box)

• Where to look: Open the glove box and check inside on the glove box liner/floor area for a silver/grey Service Parts Identification sticker. The VIN is typically printed at the top above option codes.
• Access: Often blocked by manuals/clutter and it’s dark inside the glove box—clear it out first and add light.
• Note: This is a great backup when exterior VINs are dirty or unreadable.
• Tip: Use ScanVin.app with your phone light/flash to help OCR lock onto the VIN in the shadowy glove box area.

Stamped chassis number on floor (under carpet flap)

• Where to look: In the front footwell floor panel beside the seat rail, under a rectangular pre-cut carpet/plastic flap. Lift the flap to reveal the VIN/chassis number stamped into the metal floor.
• Access: This spot gets mud, grit, and moisture from shoes. The stamping is often dark-on-dark metal, and corrosion can fill the characters—expect cleaning and strong lighting.
• Note (LHD/RHD safe guidance): On LHD cars, this stamped number is commonly on the passenger-side front footwell, but if you don’t see a flap there, check the opposite front footwell. Some regions may have it covered more completely by carpet—don’t start cutting carpet unless you’re sure.
• Tip: After brushing/scrubbing the stamp clean, use ScanVin.app “Flashlight + OCR” to read faint characters without guessing.

Video Guide

Video Tutorial: Chevrolet cruze chassis number and vin plate location kaha aata hai

▶ Watch Chevrolet Cruze VIN Location Guide

• Clear RHD walkthrough showing the floor stamp under the flap and the left-side pillar label.

Video Tutorial: 2010-2015 Chevy Cruze VIN number location - YouTube

▶ Watch Chevrolet Cruze VIN Location Guide

• LHD walkthrough showing windshield VIN, door jamb label, and the glove box sticker (plus notes about carpet coverage on some markets).

Common Problems & Troubleshooting

• Windshield glare: If you can’t read the VIN plate through the glass, change angle, shade it with your body, and wipe dust from the corner.
• Floor stamp looks “missing”: It may be under a flap or more heavily carpeted depending on market. Check both front footwells before assuming it isn’t there.
• Sticker VIN vs stamped VIN: Door/glove box stickers can be replaced. If you’re verifying identity for purchase/registration, always cross-check with the stamped chassis number when possible.

---