Where is the VIN number in FORD Focus III [2013-2018]?

This guide shows you where to find the VIN (chassis number) on the FORD Focus III produced between 2013 and 2018, including the easy-to-check visible plate and the hidden stamped VIN for verification.

Chassis Number Locations

1) B-Pillar (Door Jamb) Label

• Where to look: Open the front door and look at the B-pillar body (the pillar itself, not the door edge). You’ll find a black/white adhesive label with the VIN plus weight/paint codes; it faces outward when the door is open.
• Access: Very easy—no tools. The only “trick” is the label is vertical, so you may need to rotate your phone to frame it straight.
• Note: Placement can vary by region/production (some cars show it on the passenger-side B-pillar, others on the driver-side). If you don’t see it on one side, check the other pillar.
• Tip: Because the label is vertical and easy to misread at an angle, scan it directly with your phone to capture the VIN cleanly (often with barcode help) without transcribing errors.

2) Windshield (Dashboard) VIN Plate

• Where to look: Stand outside the car and look through the lower corner of the windshield on the left side (driver’s side for LHD). The VIN is printed on a small plate under the glass at the base of the A-pillar area (often a white/grey strip with black text).
• Access: Easy to see, but glare and reflections off the glass are common—especially in direct sun.
• Note: This is the “public” VIN used for quick checks; it should match the door label and the stamped chassis VIN.
• Tip: If glare makes the digits wash out, capture it with the ScanVin VIN reader so you can lock focus quickly and avoid mixing up similar characters like 8/B and 5/S.

3) Floor (Front Footwell, Under Mat + Carpet Flap)

• Where to look: Move the front seat back, then remove the front floor mat. In the footwell carpet, locate a pre-cut flap near the sill/center area; lift the flap to reveal the VIN stamped into the chassis metal.
• Access: Harder. It’s usually dark in the footwell, and stamped characters can be low-contrast (painted metal), so you may need to reposition your light and viewing angle.
• Note: On LHD cars it’s commonly on the passenger-side front footwell, but check the driver-side footwell if you don’t find it (RHD/LHD layouts can flip this location).
• Tip: Since the stamping is in a shadowy spot and can be faint, use the in-app flashlight and OCR to scan the stamped VIN instead of trying to read it at an awkward angle.

Video Guide

Video Tutorial: 2012-2019 Ford Focus - VIN (Vehicle Identification Number) Location

▶ Watch FORD Focus VIN Location Guide

• Clear walkthrough showing the door jamb/B-pillar VIN label and the windshield VIN plate with steady, well-lit close-ups.

Video Tutorial: FORD Focus MK3 (2011-2018) – VIN number location

▶ Watch FORD Focus VIN Location Guide

• Most complete guide: shows the B-pillar sticker, the hidden floor/chassis VIN under the mat and carpet flap, and the windshield VIN.

Common Problems & Troubleshooting

• Windshield glare/reflections: Shade the plate with your hand, change your angle slightly, and clean the glass inside/out before trying to read it.
• Stamped floor VIN is hard to read: Lift the carpet flap fully, aim a flashlight across the stamping (side-lighting helps), and wipe dust/grit off the metal so the characters stand out.
• Sticker vs. stamped mismatch: Door jamb labels can be replaced after repairs; always verify the VIN matches the windshield plate and the stamped chassis VIN before buying or registering.

---