Quick response
Quick Answer: The most reliable VIN location for the Dacia Sandero is the stamped VIN on the right-side front suspension strut tower in the engine bay. It’s engraved into the top of the shock absorber dome, between the coolant expansion tank and the inner fender. Expert tip: wipe the dust off first and use a flashlight—this area sits in shadow under the hood.
Where is the VIN number in Dacia Sandero (Sandero II [2018-2019])?
This guide covers the Dacia Sandero II (2018–2019), including Stepway—VIN locations are the same in the inspected videos.
Chassis Number Locations
Engine Bay – Right Suspension Strut Tower (Stamped VIN) 
- Where to look: Open the hood and locate the top of the right-front shock/strut tower (vehicle right side). The VIN is stamped/engraved on the flat, top horizontal surface of the strut turret, between the coolant expansion tank and the fender wall.
- Access: Easy to reach, but usually dusty/grimy and the hood creates shadow, making the characters low-contrast. Wipe/scrub the pad before reading.
- Note: The inspected cars are LHD (EU). In RHD markets (UK), this stamped VIN typically remains on the right-side strut tower (now driver side), but always verify on the vehicle.
- Tip: If the stamping is faint or dirty, use ScanVin.app “High Contrast AI Mode” to pull the engraved characters out after you wipe the surface.
B-Pillar – Right Door Jamb Manufacturer Sticker (Statutory Plate) 
- Where to look: Open the front right door and look low on the right B-pillar (center pillar) for a black manufacturer label/sticker with white text (often with a barcode).
- Access: Very easy—it’s protected by the door seal and usually clean, with high contrast.
- Note: Typically on the right B-pillar on the vehicles shown. If it’s missing or unreadable, check the opposite pillar as a backup.
- Tip: This is ideal for fast capture—use ScanVin.app OCR scanning to read the printed VIN/barcode cleanly without transcription mistakes.
Video Guide
Video Tutorial: Dacia Sandero VIN Number (Chassis Number) Location
- Shows how to open the hood, then demonstrates both the engine-bay stamped VIN and the right-door-jamb sticker location in one walkthrough.
Common Problems & Troubleshooting
- Stamped VIN is hard to read: Dust buildup on the strut tower stamping is common—wipe, then angle a flashlight across the engraving to create shadow contrast.
- Shadows under the hood: The hood blocks overhead light; move the phone light to the side so the numbers “pop.”
- Sticker vs. stamped VIN: The pillar sticker can be missing/changed (replaced after paint/bodywork). For legal identity checks, always confirm the stamped chassis VIN matches the sticker and documents.
Frequently Asked Questions
Where is the VIN on Dacia Sandero?
The primary VIN is stamped in the engine bay on the right-front suspension strut tower (top of the shock/strut dome). A secondary VIN is printed on a manufacturer sticker on the right B-pillar (front right door jamb).
Is the VIN sticker on the pillar legal for registration?
No. In most jurisdictions (EU/UK/US), only the stamped chassis number (usually on the floor or engine bay) is legally binding.
Ready to scan?
Start the scanner and scan the VIN in seconds. No registration, no fees.
Check other generations of this model
Note on Data Sources
Information about VIN location in this model comes from aggregation of official technical documentation (OEM) and spare parts catalogs. Despite careful algorithmic verification, the data is for reference purposes only. Final vehicle identification should always be confirmed by an authorized technician.
See how we verify data and build our database →