Where is the VIN number in Hyundai i20 (Hyundai i20 III [2017-2017])?

This guide covers the VIN/chassis number locations on the Hyundai i20 (Hyundai i20 III [2017-2017]), produced between 2017–2017, including the easiest spots to check first and how to scan them cleanly.

Chassis Number Locations

1) Floor stamp under the front seat (carpet flap)

• Where to look: In the front footwell area, under the front seat, there’s usually a pre-cut flap in the carpet (often reinforced with a plastic/trim edge). Lift that flap to expose the VIN stamped directly into the metal chassis/crossmember.
• Access: Slide the seat all the way back to reach the flap comfortably. It’s typically dark down there, and dust/debris can hide the characters—wipe it clean before reading.
• Note: For LHD cars, this is commonly found under the front right seat (passenger side). If you don’t find it there, check under the front left seat as well (some markets/variants place the floor stamp on the opposite side).
• Tip: Because this area is shadowed and awkward to view, use the flashlight + OCR and scan it directly with your phone instead of trying to crouch and copy the number by hand.

2) B-pillar / door jamb VIN label (sticker)

• Where to look: Open the front door and check the lower B-pillar / door jamb area (the vertical frame between the front and rear doors). You’re looking for a black sticker with white text.
• Access: Very easy access—just open the door and inspect the pillar/jamb. The main issue is age-related wear (fading, peeling, or missing sticker).
• Note: Location can vary by market, but it’s typically on the side pillar in the front door opening.
• Tip: If the sticker is intact, it’s one of the fastest to capture—use the free VIN reader to scan the label since the high-contrast print is ideal for OCR.

3) VIN visible through the windshield (dashboard corner)

• Where to look: Check the lower corner of the windshield where the VIN is visible through the glass on the dashboard (commonly on the driver-side corner).
• Access: No tools needed, but glare/reflections on the windshield can make it hard to read.
• Note: Best viewed from outside the car with the phone held close to the glass.
• Tip: To beat glare and prevent transcription mistakes, capture it instantly with your phone scanner and slightly change the angle until reflections disappear.

4) Engine bay firewall / bulkhead plate or stamp (secondary check)

• Where to look: In the engine bay, inspect the firewall/bulkhead area (rear wall of the engine compartment). Some cars have a metal tag/plate or stamp there.
• Access: Visibility varies—lighting and tight angles can make it annoying to read, and engine bay areas can be dusty.
• Note: On this i20, the under-seat floor stamp is the most consistently useful primary check, but the engine bay can serve as a backup verification point.
• Tip: If the characters are faint or you’re fighting awkward angles, scan it instead of guessing digits—a quick capture is safer than manual copying.

Video Guide

Video Tutorial: Where is the VIN number of my Hyundai I20 II ( 2012 - 2020 )

▶ Watch Hyundai i20 VIN Location Guide

• Clear walkaround showing the VIN under the front passenger seat carpet flap on an LHD i20 (best overall demo).

Video Tutorial: Hyundai i20 Chassis Number Location

▶ Watch Hyundai i20 VIN Location Guide

• Shows the under-seat floor stamp location on an RHD-market i20 (useful to understand side-to-side variation).

Common Problems & Troubleshooting

• “I can’t see the stamped VIN under the seat.” Slide the seat fully back, lift the carpet flap, and use a strong light—this area is often too dark to read without illumination.
• “The numbers look faint/dirty.” Scrub the stamped area lightly with a dry cloth (or a lightly damp rag), then re-check from a different angle—dust and shadows hide shallow stamps.
• Door-jamb sticker warning: The B-pillar VIN label can be missing, repainted over, or faded—always cross-check at least two VIN locations against the registration/title before buying.

---