Where is the VIN in the Hyundai i30?

This guide shows you the real-world VIN (chassis number) locations on the Hyundai i30 III (2017–2021) so you can confirm the vehicle identity quickly and avoid mixing it up with engine codes.

Chassis Number Locations

Front Floor (Chassis Stamp under carpet flap)

• Where to look: Slide the front seat back and check the interior floor under the seat. Look for a pre-cut carpet flap marked “FRAME NO”—lift the flap to reveal the VIN stamped into the chassis cross-member (metal floor structure).
• Access: Lighting is typically poor because the seat casts a shadow. You’ll likely need to move the seat backward for working room. Expect sand/dirt trapped around the flap—wipe/scrub before reading.
• Note: On many i30s this stamp is found on the right side of the car. For LHD vehicles that commonly means the passenger-side front footwell area, but if you don’t find it there, check the driver-side footwell/seat area as well.
• Tip: Because it’s dark and low-contrast stamped metal, use the flashlight and OCR to scan it directly with your phone instead of trying to squint and copy characters from an awkward angle.

Manufacturing Label (Door jamb / B-pillar sticker)

• Where to look: Open the front door and inspect the center pillar (B-pillar) door jamb where the door latches. You’re looking for a black or silver manufacturer sticker listing the VIN, paint code, and weight limits.
• Access: Usually easy to reach and well positioned, but the label can suffer from wear/fading over time. Bright sun can also create glare on the sticker.
• Note: This is a label (not a metal stamp). Use it for a quick read, but for identity checks it’s smart to compare it to the stamped floor VIN too.
• Tip: If glare or fading makes it hard to read, angle the phone slightly and use the VIN scanner so you don’t misread similar characters like B/8, S/5, or 0/O.

Video Guide

Video Tutorial: 2018 hyundai i30 g4nc engine number and vin number locations

▶ Watch Hyundai i30 VIN Location Guide

• A mechanic shows the under-carpet “FRAME NO” floor flap VIN stamp location on a Hyundai i30, and also points out where the engine number/engine code is found.

Common Problems & Troubleshooting

• “I can’t see the VIN under the seat.” That spot is often in deep shadow—slide the seat fully back, use a flashlight, and clean dirt/sand out of the carpet flap area before scanning/reading.
• “The stamped VIN looks faint.” The stamp can be low-contrast against body-colored metal; wipe it clean and view from an angle so the stamp relief casts a shadow.
• Sticker vs. stamped VIN: The B-pillar label can be damaged, replaced, or faded—always try to verify the VIN against the stamped chassis location for a stronger match.

---

This guide covers the VIN (Vehicle Identification Number) locations on the Hyundai i30 II (GD) produced between 2012–2016, including the hatchback and i30 SW (wagon) where the VIN spots are the same.

Chassis Number Locations

1) Front floor (under front passenger seat)

• Where to look: Inside the cabin, locate the floor cross-member directly under the front passenger seat (commonly on the right side for LHD vehicles). Lift the pre-cut carpet flap to reveal the VIN stamped into the metal.
• Access: Slide the passenger seat fully backward, then pry/lift the stiff carpet flap. The stamp is body-color metal and can be hard to read without good light.
• Note: For LHD cars, this is commonly on the right-side front footwell area. On RHD markets, check the same spot first, but if you don’t find it, check the opposite footwell as layouts can vary.
• Tip: Because it’s dark and awkward to read under the seat, scan it directly with ScanVin.app’s flashlight + OCR instead of trying to copy the characters by hand.

2) Driver’s side B-pillar / door jamb label

• Where to look: Open the driver’s door and find the manufacturer label sticker on the driver-side B-pillar, positioned below the door latch striker.
• Access: It’s easy to reach, but the sticker can be dirty, worn, or glossy, which can make the print hard to read at some angles.
• Note: On LHD cars, this is on the left side (driver side). On many RHD cars, this label is typically on the right side.
• Tip: If glare or smudges hide the print, use the VIN reader to capture it cleanly on your phone—a quick camera scan often works better than squinting at reflections.

3) Windshield VIN plate (dashboard corner)

• Where to look: From outside the car, look through the windshield at the bottom corner where the glass meets the dashboard—on LHD models it’s typically on the driver’s side (left).
• Access: This one is visible without opening anything, but windshield reflections, exterior dirt, or leaves can block the view.
• Note: On RHD cars, this location is commonly on the right (driver side).
• Tip: In bright sun, reflections can ruin readability—capture the VIN instantly with your phone so you don’t mistype similar characters like 8/B or 5/S.

Video Guide

Video Tutorial: Where is VIN Number Location in HYUNDAI i30 II ( 2012 - 2017 )

▶ Watch Hyundai i30 VIN Location Guide

• Walkthrough showing all key VIN spots, including lifting the carpet flap to reveal the hidden stamped floor VIN.

Video Tutorial: Hyundai i30 MY 2011 2017 VIN Location

▶ Watch Hyundai i30 VIN Location Guide

• Clear close-ups (with arrows) of the windshield, B-pillar label, and interior floor VIN locations on the i30 SW.

Common Problems & Troubleshooting

• Carpet flap won’t lift / VIN is hard to see: Slide the seat all the way back, then use your fingers or a plastic trim tool to lift the pre-cut flap—use a flashlight because the stamp sits in shadow.
• Windshield glare or sticker reflections: Change your viewing angle, shade the area with your body, and wipe the glass/label; reflections often make a perfect VIN look “missing.”
• Sticker vs. stamped VIN mismatch: The door-jamb label can be replaced—always cross-check the stamped floor VIN against the visible VIN and paperwork before buying.

---

This guide shows you the VIN (chassis number) locations on the Hyundai i30 I, produced between 2008 and 2011, including the hidden stamped chassis VIN and the easier sticker/visible plate options.

Chassis Number Locations

1) Floor Chassis Stamping (under front right seat)

• Where to look: Move the front right seat all the way back. In the carpet under the seat area, find a pre-cut “U”-shaped flap. Lift the flap to expose the VIN stamped directly into the metal floor cross-member/chassis.
• Access: Generally easy, but expect dust/debris under the carpet and low contrast because the stamping is often painted body color. Wipe and angle a light across it to make the characters “pop”.
• Note: This stamping sits on the right-hand side of the vehicle body. On LHD cars it’s usually under the passenger seat; on RHD cars it’s commonly under the driver seat.
• Tip: Because it’s dark under the seat and the stamping can be hard to read, use your phone to scan the VIN with Flashlight + OCR instead of trying to transcribe faint characters.

2) B-Pillar Manufacturer Label (center pillar sticker)

• Where to look: Open the front door and look at the B-pillar (center pillar between front and rear doors). The VIN is on a black/blue manufacturer sticker/plate, usually mounted low on the pillar, along with paint code and weight ratings.
• Access: Very easy—no tools. On older cars, the label may be faded, scratched, or peeling.
• Note: On LHD models this label is typically on the right-side B-pillar; on RHD models it’s typically on the left-side B-pillar.
• Tip: If the sticker print is worn, capture it with the phone VIN scanner so the app can read it cleanly without you guessing letters like B/8 or O/0.

3) Windshield VIN Tag (visible VIN plate)

• Where to look: Check the lower corner of the dashboard and read the VIN through the windshield glass (commonly at the bottom corner on the driver’s side).
• Access: Easy to spot from outside, but reflections and glare can make it annoying—plus dirt or wiper sweep marks can block the view.
• Note: This is a “quick check” VIN, but you should still confirm it matches the stamped floor VIN.
• Tip: If glare/reflections make it hard to read, scan it instantly with your camera so you don’t mistype characters.

4) Engine Block Number (engine code + serial)

• Where to look: In the engine bay, locate the stamping on the right side of the engine block (as you face the engine). It’s stamped vertically on a flat machined surface near where the engine meets the transmission (bell housing).
• Access: Severe difficulty—tight space, low light, and it’s often greasy/dirty. You may need a strong light and patience (sometimes a mirror helps).
• Note: This is typically an engine number, not the primary body VIN—but it’s useful for deeper verification.
• Tip: Because it’s cramped and grime-covered, use high-contrast AI scanning on your phone to pick out faint characters without lying on the engine bay trying to write it down.

Video Guide

Video Tutorial: Where is the VIN number of my Hyundai i30 I ( 2007 - 2012 )

▶ Watch Hyundai i30 VIN Location Guide

• Clear HD walk-around showing the floor VIN under the carpet flap, the windshield VIN tag, and the B-pillar label.

Common Problems & Troubleshooting

• Carpet flap confusion: The stamped VIN is under a U-shaped carpet cutout—slide the seat fully back, then lift the flap (don’t tear the carpet).
• Low contrast / dirty stamping: Floor VIN stampings are often painted and dusty—scrub lightly and shine a flashlight from the side to reveal the characters.
• Sticker vs stamped VIN warning: The B-pillar label can fade/peel; for serious verification, always cross-check against the stamped floor VIN.

---