Where is the VIN number in Hyundai i30 (I [2008-2011])?

This guide shows you the VIN (chassis number) locations on the Hyundai i30 I, produced between 2008 and 2011, including the hidden stamped chassis VIN and the easier sticker/visible plate options.

Chassis Number Locations

1) Floor Chassis Stamping (under front right seat)

• Where to look: Move the front right seat all the way back. In the carpet under the seat area, find a pre-cut “U”-shaped flap. Lift the flap to expose the VIN stamped directly into the metal floor cross-member/chassis.
• Access: Generally easy, but expect dust/debris under the carpet and low contrast because the stamping is often painted body color. Wipe and angle a light across it to make the characters “pop”.
• Note: This stamping sits on the right-hand side of the vehicle body. On LHD cars it’s usually under the passenger seat; on RHD cars it’s commonly under the driver seat.
• Tip: Because it’s dark under the seat and the stamping can be hard to read, use your phone to scan the VIN with Flashlight + OCR instead of trying to transcribe faint characters.

2) B-Pillar Manufacturer Label (center pillar sticker)

• Where to look: Open the front door and look at the B-pillar (center pillar between front and rear doors). The VIN is on a black/blue manufacturer sticker/plate, usually mounted low on the pillar, along with paint code and weight ratings.
• Access: Very easy—no tools. On older cars, the label may be faded, scratched, or peeling.
• Note: On LHD models this label is typically on the right-side B-pillar; on RHD models it’s typically on the left-side B-pillar.
• Tip: If the sticker print is worn, capture it with the phone VIN scanner so the app can read it cleanly without you guessing letters like B/8 or O/0.

3) Windshield VIN Tag (visible VIN plate)

• Where to look: Check the lower corner of the dashboard and read the VIN through the windshield glass (commonly at the bottom corner on the driver’s side).
• Access: Easy to spot from outside, but reflections and glare can make it annoying—plus dirt or wiper sweep marks can block the view.
• Note: This is a “quick check” VIN, but you should still confirm it matches the stamped floor VIN.
• Tip: If glare/reflections make it hard to read, scan it instantly with your camera so you don’t mistype characters.

4) Engine Block Number (engine code + serial)

• Where to look: In the engine bay, locate the stamping on the right side of the engine block (as you face the engine). It’s stamped vertically on a flat machined surface near where the engine meets the transmission (bell housing).
• Access: Severe difficulty—tight space, low light, and it’s often greasy/dirty. You may need a strong light and patience (sometimes a mirror helps).
• Note: This is typically an engine number, not the primary body VIN—but it’s useful for deeper verification.
• Tip: Because it’s cramped and grime-covered, use high-contrast AI scanning on your phone to pick out faint characters without lying on the engine bay trying to write it down.

Video Guide

Video Tutorial: Where is the VIN number of my Hyundai i30 I ( 2007 - 2012 )

▶ Watch Hyundai i30 VIN Location Guide

• Clear HD walk-around showing the floor VIN under the carpet flap, the windshield VIN tag, and the B-pillar label.

Common Problems & Troubleshooting

• Carpet flap confusion: The stamped VIN is under a U-shaped carpet cutout—slide the seat fully back, then lift the flap (don’t tear the carpet).
• Low contrast / dirty stamping: Floor VIN stampings are often painted and dusty—scrub lightly and shine a flashlight from the side to reveal the characters.
• Sticker vs stamped VIN warning: The B-pillar label can fade/peel; for serious verification, always cross-check against the stamped floor VIN.

---