Where is the VIN in the Kia Ceed?

This guide shows the VIN (Vehicle Identification Number) locations on the KIA Ceed III [2018–2021], including the quickest-to-check label and the hidden chassis stamping used for verification.

Chassis Number Locations

B-Pillar (Driver’s Door Jamb)

• Where to look: Open the front driver’s door and look at the lower section of the B-pillar. You’ll see a black sticker label with the VIN plus weight/paint info, mounted vertically.
• Access: Very easy—good lighting is usually enough. The only issue is that the sticker can peel or fade with age.
• Note: This is described for LHD vehicles (steering wheel on the left). For RHD markets, check the corresponding door jamb on that vehicle.
• Tip: If you’re trying to avoid misreading characters (8 vs B, 0 vs O), scan the label directly with your phone so the VIN is captured accurately without manual typing.

Floor VIN (Stamped in Metal Under Front Seat)

• Where to look: Check the front footwell floor area under the front seat—on many LHD cars it’s commonly on the passenger side, and on this model it’s accessed by sliding/lifting a pre-cut carpet flap to reveal a VIN stamped into the cross-member.
• Access: Harder. It’s dark and recessed, you’ll likely need to hold the carpet flap open with one hand, and the stamped characters can be low-contrast (metal-on-metal).
• Note: Use safe orientation logic: check the front floor area (commonly passenger side for LHD vehicles, but check the driver side if not found).
• Tip: Because it’s usually too dark for clean photos, use the in-app light and OCR to read it on the spot—scan the stamped VIN with ScanVin instead of fighting shadows and blur.

Windshield VIN Plate (Dashboard)

• Where to look: From outside the car, look through the lower corner of the windshield on the driver’s side, where the VIN is visible on the dashboard fascia.
• Access: Easy to reach, but glare/reflections and windshield dirt can hide characters.
• Note: Best checked in shade or with your body blocking reflections.
• Tip: Reflections can cause transcription mistakes, so capture the VIN quickly with your camera to reduce glare-related misreads.

Video Guide

Video Tutorial: Kia Ceed III (2018-now) – VIN Number Location and Meaning

▶ Watch KIA Ceed VIN Location Guide

• Clear walkaround showing the windshield VIN, the driver-side B-pillar label, and the stamped floor VIN under the carpet flap.

Common Problems & Troubleshooting

• Windshield glare: If the VIN looks “washed out,” move the car into shade, clean the glass, and change your viewing angle to kill reflections.
• Under-seat stamped VIN is unreadable: Use a flashlight, slide the seat for space, hold the carpet flap fully open, and clean the metal lightly so the stamped characters stand out.
• Sticker vs. stamped VIN mismatch: Door-jamb stickers can be replaced—always cross-check the stamped floor VIN if anything looks suspicious.

---

This guide shows you the verified VIN (chassis number) locations for the KIA Cee'd II [2012-2017], produced between 2012 and 2017—so you can confirm the car’s identity before parts ordering, registration, or buying a used vehicle.

Chassis Number Locations

1) Driver’s side B-pillar VIN label

• Where to look: Open the driver’s door and look at the B-pillar (center pillar between the front and rear doors). The VIN is printed on a black sticker/label (typically lower on the pillar face) along with weight ratings and often the paint code.
• Access: Easy access—no tools. Main risk is label wear, peeling, or damage over time.
• Note: This is a great “everyday” VIN check point because it’s readable without crawling into the car or dealing with reflections.
• Tip: If the print is slightly faded, use the camera to capture it cleanly instead of guessing characters—you can scan the VIN directly with your phone to avoid transcription mistakes.

2) Windshield VIN plate (dashboard corner)

• Where to look: From outside the car, look through the lower corner of the windshield on the left side (LHD vehicles). You’ll see a VIN plate with white characters on a black background sitting on top of the dashboard.
• Access: No tools—fastest visual check, but it’s prone to glare/reflection and outside dirt on the glass.
• Note: For LHD cars, it’s on the left side of the windshield when viewed from outside.
• Tip: Reflections can make “B/8” or “S/5” look identical—capture it instantly with the VIN scanner so you don’t misread characters through the glass.

3) Stamped VIN on the floor under the front seat (carpet flap)

• Where to look: Check the floor cross-member under the front passenger seat area (commonly passenger side on LHD). Slide the seat all the way back, then locate the pre-cut rectangular carpet flap and lift it to reveal the VIN stamped into the metal chassis.
• Access: More work: you must move the seat and lift the carpet flap. It’s usually dark under the seat, and the stamping can be dusty or low-contrast compared to a printed sticker.
• Note: On many cars this stamping is on the passenger side for LHD, but if you don’t find it there, check the driver side footwell/seat area too.
• Tip: This area is often shadowy—turn on your phone light and use ScanVin’s flashlight + OCR scan to read the stamped metal without kneeling there trying to decode it by eye.

Video Guide

Video Tutorial: Where is the VIN number of my Kia Ceed I ( 2006 – 2012 ) - YouTube

[](https://www.youtube.com/watch?v=li63xdNsFJk)

• Clear demonstration of the under-seat/floor stamping: sliding the seat back and lifting the carpet flap to access the chassis VIN.

Video Tutorial: Kia Ceed III (2018-now) – VIN Number Location and Meaning

[](https://www.youtube.com/watch?v=47Z0r7ZQNMQ)

• Walk-around tutorial showing the windshield VIN, the B-pillar label, and the under-seat floor stamping, with helpful VIN explanation overlays.

Common Problems & Troubleshooting

• Windshield glare/dirt: If the VIN plate is hard to read through the glass, clean the outside corner of the windshield and change your viewing angle to reduce reflections.
• Under-seat stamping is too dark: Slide the seat fully back and use a flashlight; if the stamping is dusty, wipe and lightly scrub the metal so the characters stand out.
• Sticker vs. stamping mismatch warning: A damaged/peeled B-pillar label can be misleading—always cross-check at least two VIN locations (label + floor stamping or windshield plate) before buying or registering.

---

This guide shows where to find the VIN/chassis number on the KIA Cee'd I, produced between 2007–2011, including the hidden stamped VIN used for identity checks.

Chassis Number Locations

1) Passenger Floor Cross Member

• Where to look: On the floor pan directly under the front passenger seat, under a rectangular cutout/flap in the carpet. Lift the flap to reveal the VIN stamped into the metal cross member.
• Access: Slide the front seat all the way back to its rear stop, then pry/lift the carpet flap to expose the stamping. Expect low light under the seat and in the footwell.
• Note: The vehicle shown is LHD and the VIN is on the right-side floor (commonly the passenger side for LHD vehicles, but check the driver side footwell if not found—especially on RHD cars).
• Tip: Because it’s dark and you’re working in an awkward position, scan it directly with your phone using ScanVin.app’s flashlight + OCR instead of trying to read and write down the characters under the seat.

2) Dashboard / Windshield (not shown in video)

• Where to look: At the bottom corner of the windshield on the dashboard (the typical “visible VIN” location on many modern cars).
• Access: View it from outside the car through the glass; you may need to change your angle to reduce reflections.
• Note: This location is often the quickest for a basic VIN check, but always compare it to the stamped chassis VIN for anti-tamper verification.
• Tip: If glare/reflections make it hard to read, capture the VIN cleanly with the ScanVin.app VIN scanner to avoid transcription errors.

3) B‑Pillar Identification Plate (not shown in video)

• Where to look: On the B‑pillar door jamb area (commonly a sticker/plate visible when a front door is open).
• Access: Open the front door and inspect the pillar/jamb surfaces for the manufacturer label.
• Note: Stickers/plates can be missing, replaced, or painted over—use the stamped floor VIN as your hard check when you’re verifying identity.
• Tip: If the label is faded or scratched, use ScanVin.app to scan the characters instead of squinting and guessing.

Video Guide

Video Tutorial: Where is the VIN number of my Kia Ceed I ( 2006 – 2012 ) - YouTube

▶ Watch KIA Cee'd VIN Location Guide

• Clear POV demo: opens the passenger door, slides the seat back, lifts the carpet flap, and shows the stamped VIN on the floor cross member.

Common Problems & Troubleshooting

• Too dark under the seat: The seat and footwell create heavy shadows—use a flashlight and clean, direct lighting to make the stamped characters pop.
• Carpet flap is hard to spot / access is awkward: Slide the seat fully back and feel for the rectangular cutout in the carpet; don’t force trim—just lift the flap carefully.
• Sticker/plate doesn’t prove everything: Door-jamb labels can be replaced—when buying or verifying the car, always cross-check the stamped chassis VIN against paperwork.

---