Where is the VIN in the Land Rover Range Rover Evoque?
Select your car's generation to see the exact VIN number locations
VIN Location Overview for Land Rover Range Rover Evoque
2 generationsSelect the generation of your car to see the exact VIN number locations
| Generation & Years | Typical VIN Locations | Details | |
|---|---|---|---|
 | II 2017 2017 | B-Pillar / Door Jamb VIN Sticker Boot / Trunk Spare Wheel Well (Hidden Stamped VIN) Windshield (Lower Corner of Dash VIN Plate)
+1 | View details |
 | I 2012 2017 | 1) Manufacturer Label (Door Pillar / B-Pillar) 2) Rear Trunk Floor (Under Cargo Mat / Insulation Flap) 3) VIN Plate Visible Through the Windshield (Dashboard Corner)
+1 | View details |
Land Rover Range Rover Evoque Land Rover Range Rover Evoque II [2017-2017]
Quick response
Quick Answer: The most reliable VIN location for the Land Rover Range Rover Evoque II [2017-2017] is the B-pillar / door jamb VIN sticker. It’s typically located on the B-pillar next to the door latch area when you open the front door, and it’s usually the clearest VIN to read and scan.
This guide shows you where to find the VIN (and chassis number) on the Land Rover Range Rover Evoque II [2017-2017], produced between 2017–2017, including the easy-to-check label and the hidden stamped location used for serious verification.
Chassis Number Locations
B-Pillar / Door Jamb VIN Sticker 
- Where to look: Open the front door and look on the B-pillar near the door latch area. You’ll see an adhesive VIN label (often black/white) with the VIN plus weight ratings and paint/trim information.
- Access: Usually clean, upright, and easy to reach—this is the fastest VIN check on the vehicle.
- Note: Depending on market, the sticker may be on the opposite side—but it’s always on a door jamb/B-pillar area.
- Tip: Because the label is vertical and usually crisp, scan it directly with your phone to avoid misreading characters like 8/B or 5/S.
Boot / Trunk Spare Wheel Well (Hidden Stamped VIN) 
- Where to look: Open the tailgate, lift the trunk floor cover, then look at the spare wheel well. On the right side of the spare wheel well (vehicle right), pull back the felt/foam liner—the VIN is stamped into the metal floor pan or on a riveted tag beneath the liner.
- Access: Physically awkward and usually dark. You may need to clear cargo out of the trunk and peel the liner back to expose the stamping/tag.
- Note: This hidden boot location is used for deeper inspections and is very useful when verifying the car’s identity.
- Tip: Since the spare-wheel well is shadowed, use your phone light and use the flashlight + OCR scan so you’re not guessing characters while bent over in the trunk.
Windshield (Lower Corner of Dash VIN Plate) 
- Where to look: From outside the vehicle, look through the windshield at the lower corner of the dashboard on the driver’s side (LHD context) where the VIN plate sits.
- Access: Easy to find, but often hard to read because windshield glass reflects light and creates glare.
- Note: Best checked in shade or with your body blocking sunlight off the glass.
- Tip: If glare is washing out the digits, capture it instantly with the VIN scanner from a slight angle to reduce reflections and prevent transcription mistakes.
Engine Bay (Riveted Plate / Chassis Marking Area) 
- Where to look: Open the hood and check the right-hand side area of the engine bay around the suspension turret/inner fender apron, and also inspect the front radiator support/slam panel area for a riveted VIN/chassis plate.
- Access: Can be dirty/greasy and sometimes partially covered by plastic trim—may require wiping the surface to read it.
- Note: Engine bay VIN plates/markings are helpful secondary checks, especially if the windshield plate or door sticker looks tampered with.
- Tip: If the stamping/plate is grimy or the characters look faint, wipe it and use High Contrast AI scanning to pull the letters/numbers out cleanly.
Video Guide
Video Tutorial: RANGE ROVER EVOQUE VIN LOCATION/ CHASSIS NUMBER LOCATION & ENGINE NUMBER LOCATION CareDrive
[![Watch Land Rover Range Rover Evoque II [2017-2017] VIN Location Guide](https://img.youtube.com/vi/XezRyqYOiqY/0.jpg)
](https://www.youtube.com/watch?v=XezRyqYOiqY)
- Shows the engine-bay VIN/number area and demonstrates lifting the trunk liner to reveal the hidden VIN in the spare wheel well.
Video Tutorial: RANGE ROVER EVOQUE (SALVA2AD)CHASSIS NUMBER LOCATION#HOW TO FIND#LOCATION
[![Watch Land Rover Range Rover Evoque II [2017-2017] VIN Location Guide](https://img.youtube.com/vi/K7kdftVyDQs/0.jpg)
](https://www.youtube.com/watch?v=K7kdftVyDQs)
- Confirms the hidden boot/spare-wheel-well VIN location and the “peel back the liner” action needed to see the tag/stamping.
Common Problems & Troubleshooting
- Windshield glare: If the VIN plate is reflecting sunlight, move the car into shade or change your viewing angle; glare can make clean numbers look “blank.”
- Hidden boot VIN is hard to access: The trunk well is dark and you must pull back trim/liner—use a flashlight and take a steady close-up scan before you let the liner snap back.
- Sticker doesn’t prove the shell: Door jamb stickers can be replaced; if anything looks suspicious, verify against the hidden boot stamping and other locations before buying.
Frequently Asked Questions
Where is the VIN on Land Rover Range Rover Evoque II [2017-2017]?
Start with the B-pillar/door jamb VIN sticker (open the front door and check near the latch area). For deeper verification, check the hidden VIN in the boot under the trunk floor at the right side of the spare wheel well behind the liner.
Which VIN location is the most important for Land Rover Range Rover Evoque II [2017-2017]?
For day-to-day checks, the B-pillar VIN label is the fastest and usually the clearest. For identity verification (the one that’s hardest to fake), the hidden stamped VIN in the boot/spare-wheel well area is the most important—always match it to the sticker and windshield VIN.
Land Rover Range Rover Evoque Range Rover Evoque I [2012-2017]
Quick response
Quick Answer: The most reliable VIN location for the Land Rover Range Rover Evoque is the manufacturer label on the B-pillar (door jamb). It’s typically on the driver-side B-pillar for LHD cars (between the front and rear doors), printed on a high-contrast sticker. It’s the fastest and easiest one to read—perfect for a phone scan.
This guide covers the VIN (chassis number) locations on the Land Rover Range Rover Evoque I, produced between 2012 and 2017. Use the door sticker for quick checks, then verify against the stamped body VIN in the trunk for a proper match.
Chassis Number Locations
1) Manufacturer Label (Door Pillar / B-Pillar)
- Where to look: Open the front door and inspect the B-pillar (the post between the front and rear doors). On LHD (US/EU) Evoques, this label is typically on the driver-side B-pillar; on RHD cars it’s commonly on the opposite side. Look for a black sticker with white text showing VIN, weights, and paint info.
- Access: Low difficulty. No tools needed. Clean and well-lit area most of the time.
- Note: If you’re checking an import, don’t assume the side—verify by walking around to the other front door if you don’t see it immediately.
- Tip: If you want to avoid transcription errors, scan the label in one shot with your phone—this type of high-contrast sticker is ideal for OCR.
2) Rear Trunk Floor (Under Cargo Mat / Insulation Flap)
- Where to look: Open the tailgate and lift/remove the main cargo floor mat/cover. Then lift the secondary carpet/insulation layer directly behind the rear seats (forward of the spare tire well area). The VIN is stamped into the metal trunk floor panel, slightly left of center, and is often hidden under a pre-cut flap in the foam insulation near a black module labeled Jaguar Land Rover.
- Access: Moderate difficulty. You’ll need the trunk emptied, and you’ll be lifting heavier carpet/foam layers. The stamping can be dusty and sits in a shadowed area.
- Note: The videos clarify an important detail: it’s not down in the spare wheel well—it’s forward of it, under the insulation closer to the rear seat backs.
- Tip: This spot is usually dark and the stamping is dot-matrix style—use Flashlight + OCR and scan it directly with ScanVin.app instead of trying to read it at an awkward angle.
3) VIN Plate Visible Through the Windshield (Dashboard Corner)
- Where to look: Stand outside the vehicle and look through the bottom corner of the windshield at the dash. On LHD vehicles it’s typically on the left side; on RHD vehicles it’s typically on the opposite side.
- Access: Low difficulty, but visibility depends on light and reflections on the glass.
- Note: If glare blocks it, change your viewing angle or shade the glass with your hand.
- Tip: Windshield glare is the main issue here—capture it instantly with the VIN scanner so you don’t misread characters through reflections.
4) Engine Bay (Chassis Stamping on Suspension Tower / Apron)
- Where to look: Open the hood. Locate the right-front suspension strut tower area (right side of the vehicle as you sit in it). The VIN is stamped on a vertical metal face of the tower/apron area, but it’s often partially obscured by hoses/lines (AC/coolant plumbing).
- Access: High difficulty. Tight viewing angle, vertical stamping, and it can be dirty/greasy. You may need a flashlight and a rag to wipe the surface.
- Note: Don’t force hoses or lines out of the way—just adjust your viewing/phone angle to see the full stamping.
- Tip: If the stamping is grimy or low-contrast, wipe it and use High Contrast AI Mode—use the free VIN reader to pick out faint characters without guessing.
Video Guide
Video Tutorial: RANGE ROVER EVOQUE VIN NUMBER CHASSIS NUMBER LOCATION||#chassisnumberlocation #2023 #vinnumber #Evoque vin number location range rover
- Handheld walkthrough showing the trunk-floor stamped VIN under the insulation flap and a look at the door pillar label.
Video Tutorial: RANGE ROVER EVOQUE (SALVA2AD)CHASSIS NUMBER LOCATION
- HD montage showing the engine-bay stamping, door pillar label, and the trunk-floor VIN area.
Common Problems & Troubleshooting
- “I lifted the trunk mat and only see the spare wheel area.” On this Evoque, the stamping is typically forward of the spare wheel well, behind the rear seats, under a foam/insulation flap—lift the upper insulation layer, not just the floor panel.
- “The engine-bay VIN is there, but I can’t read it.” It’s often tucked behind hoses/lines and can be greasy—wipe it clean, use a flashlight, and try scanning from a slightly higher angle.
- Sticker vs. stamped VIN warning: Door-jamb labels can be replaced. For theft/cloning checks, always confirm the stamped body VIN matches the windshield and door label VIN.
Frequently Asked Questions
Where is the VIN on Land Rover Range Rover Evoque?
Start with the manufacturer VIN label on the B-pillar (door jamb). Then verify the stamped VIN under the rear trunk carpet/insulation flap behind the rear seats.
Which VIN location is the most important for Land Rover Range Rover Evoque?
The stamped body/chassis VIN is the most important because it’s physically part of the vehicle structure and is harder to tamper with than stickers. Use the door label and windshield plate for convenience, but confirm they match the stamped VIN.
Don't see your generation?
Try scanning simple VIN code. Our scanner will automatically identify the Make, Model and Generation.
Scan VINNote on Data Sources
Information about VIN location in this model comes from aggregation of official technical documentation (OEM) and spare parts catalogs. Despite careful algorithmic verification, the data is for reference purposes only. Final vehicle identification should always be confirmed by an authorized technician.
See how we verify data and build our database →