Where is the VIN number in Opel Mokka (Mokka) [2013-2018)?

This guide covers where to find the VIN (chassis number) on the Opel Mokka produced between 2013 and 2018, including the most reliable stamped location and the common secondary spots.

Chassis Number Locations

Engine Bay Bulkhead (Firewall)

• Where to look: Open the hood and look at the firewall/bulkhead (the metal wall between the engine and cabin). The VIN is stamped directly into the metal, located roughly central on the firewall, below the plastic cowl/scuttle panel and behind/above the engine—you’ll usually spot it by looking over the top of the engine cover and intake piping.
• Access: This is a recessed, shadowed area under the cowl. Expect hoses/wiring looms to partially block the line of sight, and plan to wipe/scrub off dust and road grime so the characters show clearly.
• Note: The videos are RHD UK-spec (Vauxhall badge), but this firewall stamp sits centrally and is typically in the same place on LHD Opel models—you’re still hunting at the back of the engine bay, under the cowl line.
• Tip: Because the stamping is often low-contrast and sits in shadow, use a light plus software help—scan it directly with ScanVin.app using the flashlight and high-contrast reading to catch faint stamped characters without guessing.

Dashboard / Windshield (Visible from Exterior)

• Where to look: Stand outside the vehicle and check the lower corner of the windshield on the left side (driver’s side for LHD) for the visible VIN plate/tag behind the glass.
• Access: Easy to reach, but glare/reflections on the windshield can make the characters look “washed out,” especially in sun or under forecourt lights.
• Note: This is the quick check most buyers do first; it’s useful for paperwork matching, but always compare against a stamped VIN when possible.
• Tip: If reflections are fighting you, capture the VIN instantly with your phone using ScanVin.app so you don’t mistype characters like 8/B or 5/S.

Floor (Under Carpet Flap)

• Where to look: Check the front footwell floor, typically under a pre-cut carpet flap or small cover near the seat rails/door-sill area. This is commonly on the passenger side for LHD vehicles, but check the driver side footwell if not found.
• Access: You’ll need to move the mat, then lift the carpet flap/cover to expose the VIN/numbering area. This spot can be dusty and is easy to overlook if the flap is pressed flat.
• Note: This location varies by trim/market; treat it as a good secondary verification point if you can’t get a clean read in the engine bay.
• Tip: Once the flap is lifted, it’s often dark down there—use ScanVin.app to scan with flashlight + OCR so you don’t have to contort and manually write down the code.

Video Guide

Video Tutorial: Vauxhall Opel Mokka (2016) Chassis Vin Number Location pr/blk

▶ Watch Opel Mokka VIN Location Guide

• Clear walk-around showing the hood opened and the VIN stamped on the firewall/bulkhead with a good, unobstructed view.

Video Tutorial: Vauxhall Opel Mokka (2018) Chassis Vin Number Location pr/blk

▶ Watch Opel Mokka VIN Location Guide

• Supplementary footage on a facelift (Mokka X) showing the same firewall stamping, but with a slightly more obstructed view due to hoses/wiring.

Common Problems & Troubleshooting

• Firewall stamp too dark to read: The VIN sits under the cowl and gets little natural light—use a flashlight and wipe the metal clean before trying to read or scan it.
• Characters hidden by hoses/wiring: Change your viewing angle (lean over from the center), and gently reposition soft hoses without stressing connectors to get a clear line of sight.
• Sticker/plate doesn’t match or looks tampered: Windshield tags and door-jamb stickers can be replaced—always verify against a stamped metal VIN and the vehicle paperwork before buying.

---