Where is the VIN number in Peugeot 208 (208 II [2019-2021])?

This guide shows the VIN (Vehicle Identification Number) locations for the Peugeot 208 II (2019–2021), so you can confirm the car’s identity, match paperwork, and scan the VIN accurately for decoding.

Chassis Number Locations

Engine Bay — Chassis VIN Stamping (Right inner wing/fender support)

• Where to look: Open the hood and locate the VIN stamped directly into the metal on the right-hand inner wing/fender support, close to the coolant expansion tank area and near the strut tower. The characters are typically dot-matrix style pressed into the painted metal.
• Access: The area is relatively open, but the stamping can be obscured by dirt/grime—scrub it gently with a rag and a mild cleaner to bring the characters back.
• Note: “Right-hand” means the vehicle’s right side (direction of travel). On many LHD 208s this is commonly the passenger-side inner wing, but use the physical reference points (coolant tank/strut tower) rather than “driver/passenger” if you’re unsure.
• Tip: If the stamp is dusty or low-contrast, scan it directly with ScanVin.app using the high-contrast VIN reader so you don’t misread dot-matrix characters.

Windshield — Visible VIN Plate (Lower corner)

• Where to look: Stand outside the car and look through the glass at the lower passenger-side corner of the windshield (a small VIN window/plate behind the glass).
• Access: Easy to reach and doesn’t require opening anything, but glare/reflections can block the view depending on sun angle.
• Note: On some markets the visible VIN can appear on the opposite lower corner—if you don’t see it immediately, check both lower corners from outside.
• Tip: If reflections are washing out the numbers, capture it instantly with your phone using ScanVin.app to avoid transcription errors from glare.

B-Pillar / Door Jamb — VIN Sticker (Certification label)

• Where to look: Open a front door and inspect the B-pillar/door jamb area for a black/white VIN sticker (often combined with tire pressure and paint information).
• Access: Usually very easy—flat surface and good visibility—but the label can fade, peel, or get damaged over time.
• Note: Sticker placement can vary by region (left or right side of the car). If you don’t find it on one side, check the other door jamb.
• Tip: If the sticker text is faint, use the ScanVin.app VIN scanner to read and confirm the string without guessing worn characters.

Video Guide

Video Tutorial: Peugeot 208 (2020) Chassis Vin Location pr/str

▶ Watch Peugeot 208 VIN Location Guide

• Shows a clear under-hood walkthrough on a 2020 Peugeot 208 II, zooming in on the chassis VIN stamping on the inner wing.

Common Problems & Troubleshooting

• Engine bay stamping looks “blank”: Road film and dried grime can fill dot-matrix stamping—wipe, then re-check from a slight angle so shadows reveal the characters.
• Windshield VIN hard to read: Sun glare/reflections are common—change your viewing angle, shade the glass with your hand, or scan it with your phone.
• Sticker VIN doesn’t match: Door-jamb stickers can be replaced or damaged—for identity checks, prioritize the stamped chassis VIN and verify it matches the registration documents.

---