Where is the VIN number in SEAT Ibiza (V [2016-2016])?

This guide covers where to find the VIN (vehicle identification number) on the SEAT Ibiza (V [2016-2016]) produced between 2016 and 2016—including the easiest stamped chassis location and the backup VIN stickers.

Chassis Number Locations

Engine bay VIN stamping (strut tower)

• Where to look: Open the hood. Find the coolant expansion tank. The VIN is stamped into the metal on top of the right-hand strut tower (right side of the car), running parallel to the fender.
• Access: Low difficulty. Fully exposed, but the stamping can be hard to read because it’s body-color paint and collects dirt.
• Note: Written for LHD cars; “right-hand” is the right side of the vehicle (as you sit in it / direction of travel).
• Tip: If the stamped characters look “flat” in bright light or are grimy, wipe the area and use High Contrast AI Mode to scan it directly so the app can pick out the stamped edges.

Manufacturer VIN label (engine bay sticker on strut tower)

• Where to look: In the engine bay, look on the vertical face of the right-hand strut tower, directly below the stamped VIN area. You’ll see a black manufacturer label with the VIN and weight/type info.
• Access: Medium difficulty. The label is vertical and often dark/dirty from engine bay grime—wipe before reading.
• Note: If the car is wet/snowy, dry the sticker so the print isn’t distorted.
• Tip: Because it’s white text on black, it scans very well once clean—use the phone VIN reader to capture it without misreading similar characters (8/B, 5/S, 0/O).

Windshield VIN (visible VIN plate)

• Where to look: From outside the car, check the lower corner of the windshield on the left side of the vehicle (driver’s side on LHD).
• Access: High difficulty. Glare, rain/snow droplets, and dash reflections make it hard to photograph cleanly.
• Note: Try viewing from slightly above and off-angle to reduce reflections.
• Tip: If reflections wash it out, capture it with your phone from a slight angle so the app grabs the VIN instantly without manual transcription errors.

Trunk floor data sticker (option/PR code sticker)

• Where to look: Open the trunk and lift the trunk carpet/floor mat. On the painted metal floor near the spare wheel well (commonly to the left of the well) is a white paper data sticker.
• Access: Medium difficulty. You may need to unload cargo and lift the floor panel.
• Note: This sticker is useful for build/option/paint info and often repeats the VIN.
• Tip: If the paper label is dusty or slightly torn, scan it with OCR so you don’t have to manually type long codes.

Video Guide

Video Tutorial: Seat Ibiza 2010 - VIN Number Location

▶ Watch SEAT Ibiza VIN Location Guide

• Walk-around in winter conditions showing the engine bay VIN stamping and the nearby manufacturer label on the strut tower.

Common Problems & Troubleshooting

• Stamped VIN hard to read (paint/dirt/low contrast): Scrub the strut tower stamping with a rag and angle a flashlight across the numbers to create shadows in the stamping.
• Sticker too dark or grimy: Clean the vertical strut tower label before scanning; oily film can make characters “bleed” in photos.
• Sticker vs. stamping mismatch: If a VIN sticker looks tampered with or doesn’t match the stamped VIN, trust the stamped chassis VIN and verify the vehicle history before purchase.