Where is the VIN number in Suzuki Grand Vitara II (2006-2007)?

This guide shows where to find the VIN (chassis number) on the Suzuki Grand Vitara II, produced between 2006 and 2007, using the most consistent locations found on real vehicles.

Chassis Number Locations

Engine Bay Firewall / Bulkhead VIN Stamp

• Where to look: Open the hood and go to the rear of the engine bay (closest to the windshield). Locate the metal firewall/bulkhead under the wiper/cowl area—the 17-character VIN is stamped directly into the metal, roughly centered (often slightly offset depending on market/packaging).
• Access: No parts removal, but expect heavy dust/grime and shadow from the cowl. Wipe with a rag and use a flashlight; hoses/wiring run nearby but usually don’t cover the characters.
• Note: The videos show RHD vehicles, but for LHD the bay layout may be mirrored; the stamp is still generally at the rear-center area of the firewall under the cowl.
• Tip: Because this stamp is often dirty and low-contrast, use ScanVin.app’s high-contrast VIN scanning after you scrub the metal lightly so the OCR can pick up faint characters.

Engine Bay Manufacturer Plate / Type Plate (VIN Plate)

• Where to look: Look for a riveted metal manufacturer/type plate in the engine bay—commonly on the inner fender (inner wing/strut tower area) or on the firewall near the stamped VIN. This plate typically lists the VIN plus other data (engine type, color code, etc.).
• Access: Very easy to reach, but the plate can be reflective, so you may need to change your viewing angle to read it clearly.
• Note: Plate placement can vary by market/build: it may be on the inner fender or on the firewall—check both areas.
• Tip: If glare makes the characters hard to read, capture the VIN instantly with your phone using ScanVin.app so you don’t misread similar characters like 8/B or 5/S.

Engine Block Engine Number (Not the VIN)

• Where to look: Deep on the engine block, often near the exhaust manifold area or gearbox bell housing junction—this is the engine number, not the 17-character VIN.
• Access: Extremely difficult without the right angle/lighting; it’s down low in a hot, cramped area.
• Note: Don’t confuse this shorter engine code/number with the VIN—buyers commonly mix these up during inspections.
• Tip: If you must record it, scan it with ScanVin.app to avoid writing it down from an awkward angle in a tight space.

Video Guide

Video Tutorial: SUZUKI GRAND VITARA TD54V VIN / CHASSIS NUMBER LOCATION & J20A ENGINE NUMBER LOCATION

▶ Watch Suzuki Grand Vitara VIN Location Guide

• Shows the firewall VIN stamp, the riveted manufacturer plate, and a close-up attempt at the engine number location.

Video Tutorial: SUZUKI ESCUDO CHASSIS AND ENGINE NUMBER LOCATION

▶ Watch Suzuki Grand Vitara VIN Location Guide

• Confirms the same firewall-stamped VIN and shows a plate variant mounted on the firewall.

Common Problems & Troubleshooting

• VIN stamp is dirty or looks “missing”: The firewall area under the cowl collects dust and grime—scrub it with a rag (light cleaner helps) and use a flashlight from the side to bring out the stamped depth.
• Plate is hard to read due to reflections: The manufacturer plate is often shiny; tilt your phone/flashlight or shade it with your hand to reduce glare.
• Don’t rely only on stickers: If you find a printed VIN sticker, treat it as a reference—confirm the VIN against the stamped metal and the riveted plate before buying or registering.

---