Where is the VIN on Tesla Model 3?

Check the driver’s side B-pillar door jamb certification label first. You can also see the VIN through the lower driver-side windshield corner (dashboard plate).

Which VIN location is the most important for Tesla Model 3?

For quick ID, the B-pillar door-jamb label is the most practical because it’s clear and easy to scan. For verification, cross-check it against the windshield VIN plate and the VIN shown in the touchscreen Software menu; the stamped chassis VIN under the carpet flap is a strong backup when accessible.

Where is the VIN in Tesla Model 3 (2019-2021)? - Location Guide

This guide shows the common VIN (chassis number) locations on the Tesla Model 3 (2019–2021), including the quick-to-check labels and the harder-to-access stamped chassis spot.

Chassis Number Locations

Windshield (dashboard VIN plate)

Where to look: From outside the car, look through the lower corner of the windshield on the left side (driver’s side for LHD). The VIN plate sits on top of the dashboard under the glass.
Access: Easy to spot, but reflections and windshield glare can make it hard to read.
Note: Works the same on LHD and RHD cars—position is on the vehicle’s left side.
Tip: If glare washes out the letters, capture it cleanly with your phone using the VIN scanner and change your angle slightly instead of trying to hand-type it.

Driver’s door B-pillar certification label (door jamb)

Where to look: Open the driver’s door and look at the B-pillar/door post area. You’ll see a printed certification sticker with tire/loading info and the VIN.
Access: Very low difficulty—good lighting, high-contrast text, no trim removal needed.
Note: On LHD cars this is on the left (driver’s) side; on RHD cars it may be on the opposite side, so always check the door you drive from first.
Tip: This is the best place to avoid transcription mistakes—scan it directly from the sticker with the free VIN reader.

Stamped VIN under the front seat / floor (carpet flap)

Where to look: Check the floor area under a front seat for a small cut-out/carpet flap. Lift the flap to reveal the VIN stamped into the metal chassis/floor panel.
Access: Moderate difficulty. You may need to slide the seat back, lift mats, and work in low light under the seat.
Note: This location can vary by market. The report shows it on the right-hand front seat/floor area on an RHD vehicle. For LHD vehicles, start by checking the front footwell floor (commonly on the passenger side for LHD vehicles, but check the driver side footwell if not found).
Tip: It’s usually dark under the seat—use your phone light and scan the stamping without awkward handwriting using ScanVin’s Flashlight + OCR scanning.

VIN on the touchscreen (Software menu)

Where to look: On the center screen: tap Controls (Car icon) → Software. The VIN is displayed digitally.
Access: No physical access needed—only requires the car to have power and a working screen.
Note: Same menu path on LHD and RHD cars.
Tip: If the camera shows screen flicker or banding, scan it with a quick capture using the phone VIN scanner and hold the phone steady for a moment.

Hidden VIN label under B-pillar weather stripping (upper pillar area)

Where to look: With a door open, locate the vertical rubber weather seal along the B-pillar. Gently pull the seal back to reveal a hidden white label underneath with the VIN.
Access: High difficulty. You’re manipulating trim/weather stripping—work slowly so you don’t tear the seal or stretch it.
Note: This is a secondary/backup ID point if the main door-jamb label is damaged or missing.
Tip: Because it’s awkward to hold the seal back and read the code, scan it instead of writing it down with the camera VIN reader.

Video Guide

Video Tutorial: TESLA MODEL 3 ELECTRC VIN LOCATION / CHASSIS NUMBER LOCATION CareDrive

▶ Watch Tesla Model 3 VIN Location Guide

Shows the B-pillar label and the hard-to-find stamped VIN under the carpet flap under the seat.

Video Tutorial: Tesla Model 3 VIN Number Location: Where to Find It and Why It's Important