Where is the VIN number in Toyota Corolla X (E140/E150)?

This guide covers the VIN (Vehicle Identification Number) locations on the Toyota Corolla X (E140/E150) produced between 2007–2012, with the quickest scan points first.

Chassis Number Locations

Driver’s Door Jamb / B-Pillar Certification Label

• Where to look: Open the driver door and look on the driver’s side B-pillar (door jamb) below the latch/striker area for a black certification label showing the VIN, barcode, and build details.
• Access: Low difficulty. Usually clean and readable, but older labels can fade or peel.
• Note: This guide is written for LHD vehicles (US/EU style). The label is shown on the driver-side B-pillar in the inspection footage.
• Tip: If you want to avoid misreading a character (like B/8 or O/0), scan the barcode/VIN directly with your phone while the door is open.

Windshield Base (Dash VIN Plate)

• Where to look: From outside the car, look through the lower driver-side corner of the windshield at the dash for a metal VIN plate riveted to the dashboard.
• Access: Easy to find, but can be hard to read because of sun glare/reflections on the glass.
• Note: Common on LHD Corollas—stand on the left side of the vehicle and angle your view down into the corner.
• Tip: Reflections can hide digits—capture the VIN instantly with your camera (shade the glass with your hand if needed) so you don’t have to manually transcribe it.

Engine Bay Firewall / Bulkhead (Stamped Chassis Number)

• Where to look: Open the hood and check the firewall/bulkhead at the rear of the engine bay (center-rear area) for a VIN/chassis number stamped directly into the metal, often under the cowl overhang and behind/near hoses or wiring.
• Access: High difficulty. The area is commonly shadowed, partly obstructed by lines/harnesses, and may be dirty/grimy—you may need to wipe/scrub it before the characters show.
• Note: Exact placement can vary slightly with engine/market equipment, but it will be on the firewall stamping area.
• Tip: After you wipe the grime off, use high-contrast scanning to read the stamped characters—it helps when the stamp is body-colored and low-contrast.

Floor (Under Seat / Carpet Flap) — Not verified in the videos

• Where to look: Check for a small carpet cutout or plastic flap in the front footwell floor area that may hide a chassis stamping.
• Access: Medium difficulty. Requires moving the seat and lifting trim/carpet; can be dusty and poorly lit.
• Note: This spot was not shown in the provided videos. If you search here, check the front footwell floor (commonly on the passenger side for LHD vehicles, but check the driver side footwell if not found).
• Tip: If you do find a stamping under carpet/trim, scan it with your phone using flashlight + OCR so you don’t have to hold an awkward angle and write it down.

Video Guide

Video Tutorial: VIN Locations - Toyota Corolla (2003-2008)

▶ Watch Toyota Corolla X VIN Location Guide

• Walkthrough showing the windshield VIN plate and the driver-side door jamb certification label clearly.

Video Tutorial: How to know car identification number Toyota Corolla

▶ Watch Toyota Corolla X VIN Location Guide

• Shows the stamped chassis/VIN location on the engine-bay firewall (harder-to-see but important).

Common Problems & Troubleshooting

• Windshield glare: If the dash plate is washed out by reflections, change your viewing angle, shade the glass with your hand, or scan it rather than typing it.
• Dirty/low-contrast firewall stamp: Scrub the area with a rag and mild cleaner; use a flashlight—stamped characters can be body-colored and disappear under grime.
• Sticker validity warning: If the door-jamb label looks tampered with, missing, or doesn’t match other VIN locations/documents, verify using the stamped metal VIN/chassis number and investigate before purchase.

---