Where is the VIN number in Renault Master (Master III (Phase III) [2019-2019])?

This guide shows where to find the VIN (and other identifying numbers) on the Renault Master III (Phase III) produced between 2019–2019, using the most common factory stamp and label locations.

Chassis Number Locations

Front passenger step (chassis VIN stamp)

• Where to look: Open the front passenger door. On the floor step trim (the area you step on to get in), locate the rectangular plastic flap/cover integrated into the trim. Pry/lift the flap, and you’ll see the VIN stamped into the metal chassis underneath.
• Access: This spot is low and shadowed, and the stamped characters often fill with mud/grit—you may need to brush, wipe, or scrub the stamp before it becomes readable.
• Note: The floor VIN is on the passenger side (it mirrors between LHD and RHD markets). If you can’t find it there, check the opposite footwell as a backup.
• Tip: If the stamp is dark or packed with dirt, use your phone light and scan it directly with the flashlight + OCR tools so you don’t misread characters like B/8, S/5, or Z/2.

Passenger-side B-pillar / door frame VIN label

• Where to look: Open the front passenger door and check the B-pillar/door jamb area. Look below the striker plate for the manufacturer data sticker (VIN + weight ratings).
• Access: Usually easy and clean—it’s a printed label with good contrast.
• Note: This is one of the quickest places to confirm the VIN for paperwork and registration checks.
• Tip: For fast, error-free capture, use the free VIN reader to scan the sticker in one shot instead of typing 17 characters by hand.

Lower windshield VIN plate (visible VIN)

• Where to look: Look through the windshield at the bottom corner on the passenger side for the visible VIN tag under the glass.
• Access: Easy to spot, but reflections/glare can make it hard to read or photograph.
• Note: Great for a quick verification without opening doors.
• Tip: If glare is washing out the digits, capture it with your phone using ScanVin.app to avoid transcription mistakes caused by reflections.

Engine block number / engine VIN stamp

• Where to look: Open the hood. Look deep down between the radiator fan area and the engine, slightly right of center (when facing the engine). The number is dot-peened onto a flat machined surface on the front face of the engine block, near hoses/sensor housings.
• Access: Very difficult—tight space, low light, and often blocked by hoses and wiring. The dot-peen marking can be low-contrast and oily.
• Note: This is the location you check when you need to confirm the engine/block marking, not just the body VIN label.
• Tip: Since it’s deep and greasy, use High Contrast AI Mode to scan it from an awkward angle instead of trying to read dot-peened characters by eye.

Video Guide

Video Tutorial: 2022 renault master van vin and engine number locations

▶ Watch Renault Master VIN Location Guide

• Clear walkthrough showing the passenger step chassis VIN and an excellent deep zoom on the engine block stamping.

Video Tutorial: Location of chassis number and engine RENAULT/MASTER MBUS L3H2 2013 2014

▶ Watch Renault Master VIN Location Guide

• All-in-one walkaround confirming the windshield VIN, B-pillar label, floor VIN flap, and a second angle on the engine bay stamp.

Common Problems & Troubleshooting

• Floor stamp is unreadable: Dirt/mud packs into the stamped letters. Scrub with a brush + wipe and use strong side-lighting to make the stamp pop.
• Engine stamp is hard to see: It’s deep, dark, and obstructed by hoses/wiring, and dot-peen text has low contrast—use zoom + high-contrast scanning instead of forcing your head into the bay.
• Sticker vs. stamped VIN mismatch: Door-jamb stickers can be replaced. For identity checks, always compare the sticker VIN to the chassis stamp (and investigate any mismatch before purchase/registration).

---