Where is the VIN number in Toyota RAV4 (V [2019-2022])?

This guide covers the VIN number locations on the Toyota RAV4 5th generation (2019–2022), including the quick-to-scan labels and the harder-to-access stamped chassis/engine markings.

Chassis Number Locations

B-pillar VIN / compliance label (door jamb)

• Where to look: Open the front passenger door and look on the B-pillar (center post) near the lower section. You’ll see a tamper-proof black or silver label with printed VIN details (often with a barcode/QR).
• Access: Low difficulty. No tools needed; clean, flat surface.
• Note: On RHD examples, this label may be on the left/passenger side; on LHD, it’s typically on the front passenger door jamb.
• Tip: If you want to avoid misreading characters like “S/5” or “B/8,” use ScanVin to scan the label instantly with your phone via the /en/scan-vin/ VIN reader.

Stamped chassis VIN (under front seat / floor flap)

• Where to look: Check the front footwell floor area under the front seat. Slide the seat fully back and locate a pre-cut carpet flap or a plastic cover marked like “FRAME NO / VIN”. Lift the cover to reveal the VIN stamped into the chassis beam.
• Access: Medium difficulty. You’ll be prying/lifting a cover and working in a dark footwell.
• Note: This stamp is commonly found on the right-hand side chassis rail (often passenger side on LHD). If you don’t find it there, check the opposite front footwell/seat area.
• Tip: The footwell is usually shadowy—use the app’s Flashlight + OCR to scan it directly without twisting into an awkward position: /en/scan-vin/.

Windshield VIN plate (dashboard)

• Where to look: From outside the car, look through the bottom corner of the windshield on the driver’s side for the VIN plate visible through the glass.
• Access: Low difficulty, but reflections can make it hard to read.
• Note: Best checked outdoors in shade or with your body blocking glare.
• Tip: If glare washes out the characters, capture it cleanly with your camera using the ScanVin tool to reduce transcription errors: /en/scan-vin/.

Engine number (stamped on engine block)

• Where to look: In the engine bay, locate the engine number stamped directly into the metal block. On examples shown, it’s deep in the bay—near the belt side/front area and (on Hybrid layouts) to the right of the pink coolant reservoir.
• Access: High difficulty. It’s often greasy/dirty and partially hidden by hoses/wiring; you may need to wipe/scrub the area first.
• Note: This is typically an engine number, not the primary VIN label—but it’s useful for identity checks and paperwork.
• Tip: After a quick clean, use High Contrast AI Mode to pick out faint stamped characters and scan it instead of copying by hand: /en/scan-vin/.

Underside of hood label (A/C & system info sticker)

• Where to look: Open the hood and look near the latch mechanism on the underside of the hood for a silver information label.
• Access: Low difficulty. Easy visibility once the hood is open.
• Note: This label usually lists system specifications and is not typically the full VIN, but it’s still useful for confirming equipment details.
• Tip: For quick documentation, you can capture the label clearly with your phone using /en/scan-vin/ so you don’t miss small print.

Video Guide

Video Tutorial: Locating the engine, chassis, and serial number of a 2020 Toyota ...

▶ Watch Toyota RAV4 VIN Location Guide

• Concise walkthrough showing engine number, under-seat/floor stamped VIN access, and the B-pillar label on an LHD 2020 RAV4.

Video Tutorial: 2020 Toyota Rav4 Stamped Vin Number Location - YouTube

▶ Watch Toyota RAV4 VIN Location Guide

• High-clarity RHD Hybrid example demonstrating how to lift the floor cover for the stamped VIN and where to find key ID labels.

Common Problems & Troubleshooting

• Can’t see the stamped VIN under the seat: Slide the seat fully back, then lift the carpet flap/plastic cover; use a flashlight because the footwell lighting is poor.
• Engine number won’t read (grease/dirt): Degrease and wipe the stamping area first; a dirty stamp will make characters look “missing.”
• Sticker vs. stamp mismatch: Door-jamb labels can be replaced—if you’re verifying a vehicle, always cross-check the B-pillar label against the stamped floor VIN and the paperwork/title.

---